Coverage · Tacoma and Ruston
Sub-Zero Repair on Sixth Avenue, Tacoma
Tacoma Water inside the city limits
Sixth Avenue crosses the north of the city from near Titlow Park to downtown, and the stretch in the middle is one of Tacoma’s busiest business districts.
Homes along it and on the streets behind it are houses and apartments alike. In an apartment, the valve that feeds the refrigerator may not be in your kitchen at all, and finding it comes before anything else.
What we see here
- Tacoma Water says white or cloudy tap water is typically tiny trapped air bubbles; cubes frozen from it can look cloudy too, which is no fault on its own.
- On twist-in models Sub-Zero signals a filter change with a filter life monitor or a REPLACE FILTER message, so the display, not the calendar, decides.
- In an apartment, the refrigerator's shut-off can sit in a utility closet, under a nearby sink or behind the unit itself, out of reach.
On your side of the Shut-Off Line
- Find the valve that feeds the refrigerator; in an apartment it can sit in a utility closet, under a nearby sink or behind the unit itself.
- Ask whether anyone closed that valve during recent plumbing work in the building.
- Let a cloudy glass stand a minute before worrying: Tacoma Water puts white tap water down to trapped air, and cubes can look the same.
Then the five that apply anywhere, in order: switch, filter, supply valve, fill tube, arm and bin.
Past this line it is a technician's job Sub-Zero Repair Tacoma, (206) 472-1140
Booking
When you book, say whether it is a house or a flat, which floor, and where a technician can park near the avenue.
The $89 visit pays for the trip and the whole diagnosis, and once you approve the repair that $89 is deducted from its price. The phone is answered 24/7; visits run 8 am to 8 pm, Monday through Sunday.
What the visit covers is on the Sub-Zero ice maker repair page. On this water, read Is Tacoma Water Hard Enough to Scale an Ice Maker first.
Reviews
Said after the visit
5.0/ 51,664 reviews
Vacuum door kept popping back open a second after closing. The gasket had a split along the hinge side you could only see with a torch. New gasket, and it seals properly now.
Wyatt L.Northeast TacomaApr 2026
Bin sat empty for four days and nothing dropped. Inlet valve had failed shut. The part took a week to arrive, which was frustrating, but he fitted it and the machine has run since.
Lucia B.Stadium DistrictJan 2026
Glass door fogged on the inside and stayed that way all autumn. The door heater had gone open circuit. He tested it cold, replaced it, and the glass has been clear since.
Deirdre M.North TacomaNov 2025