Tacoma · Sub-Zero
Wine Cooler Repair
Dual-zone control, damper and compressor service for Sub-Zero wine storage units and wine columns.
How it lands on the phone
- Upper zone reading five degrees off the setpoint it is holding
- Glass door fogging on the inside and staying that way
- Unit running loud enough to hear from the next room at night
- Interior lights on but the compressor never kicks in
What happens on the visit
Temperatures logged at both compartments before anything comes apart, then the sealed system read under gauges and the defrost and control circuits tested in sequence. A Sub-Zero rarely fails in a way that needs guessing — it fails in a way that needs measuring.
You get the cause, the reading it came from, and a firm number for parts and labour. Nothing is opened up or ordered until you have said yes to that number. The bands that number comes from are set out further down this page.
Rest of the work
- Refrigerator Repair Sealed-system, evaporator and control diagnostics on built-in and integrated Sub-Zero refrigerators.
- Freezer Repair Defrost circuit, evaporator and door-seal work on Sub-Zero freezer columns and built-in freezer sections.
- Ice Maker Repair Clear-ice module, inlet valve, filter and drain repairs for Sub-Zero ice makers and standalone ice machines.
What it costs
The bands we quote from
Parts and the labour to fit them, grouped the way the faults actually arrive in Tacoma. Once the readings are in, your job sits inside one of these six.
Service call
Flat $89 service call covering the visit and full diagnosis, credited against the repair once you approve it.
You are quoted one firm number from inside the relevant band, agreed with you before a single screw comes out — and the service call comes off that number the moment you approve the work. Nothing is ordered or opened up until then.
- Door gasket or seal replacement
- $290–$660
- Evaporator or condenser fan motor
- $310–$700
- Defrost heater, thermostat or sensor
- $270–$680
- Ice maker, water valve or supply line
- $260–$780
- Electronic control board
- $390–$1,000
- Compressor or sealed-system repair
- $1,440–$3,390
These are ranges, not starting prices. What moves inside one is the part itself and how far the unit has to come out of its cabinetry. For scale, a comparable built-in replacement, before installation and cabinetry work, runs $11,550–$21,190 — which is the comparison worth making before you decide either way.
From the route
What the calls sound like
4.9/ 51,475 reviews
Upper zone was holding five degrees off its setpoint while the lower zone was fine. Thermistor, not the board. He talked me through the readings before he ordered anything.
Oriana C.North TacomaMar 2026
Wine unit was six degrees out between zones and had been for a year. Damper motor. He quoted it, fixed it, and showed me the logged temperatures before he packed up.
Steve B.Northeast TacomaJul 2025
Interior lights came on but the compressor never started. A relay on the control board had failed. He explained it clearly, though I had to chase the office twice for the appointment.
Sonya P.Stadium DistrictJun 2026
Tacoma, WA · On site 8:00 am – 8:00 pm, seven days
Tell us what
it is doing
Model number and the symptom is enough to start. Most faults get named on the phone; the visit confirms it under gauges and the price is agreed before a single screw comes out. The line is answered 24/7.